Browse

Back to List

1021
TIG Perfect
Welder
Accessories
Price
$379.95

TIG Perfect

Have you ever wished that you could be making professional quality TIG welds using pulsing functionality, but you couldn't justify buying a welder with these features for roughly twice the price?

TIG Perfect is a plug and play device which gives your under-equipped TIG welder pulsing functionality at a fraction of the cost. All you do is plug the pedal into TIG Perfect, and plug TIG Perfect into the pedal port of your welding machine - now your welder has been upgraded to have pulsing functionality.

TIG Perfect Features:

  • 3 Wave Profiles To Choose From And Customize (Square, Triangle, and Sawtooth)
  • Pulse Frequency Is Adjustable Between 0.5 HZ and 40 HZ (1 Pulse Every 2 Seconds To 40 Pulses Per Second)
  • Duty Cycle And Background Amperage Is Configurable
  • Delay Before Pulse Start Is Configurable
  • 3 Profiles Available That You Can Configure And Switch To On The Fly
  • When TIG Perfect Is Turned Off, Your Welder Will Revert Back To Normal Operation (You Can Leave Everything Plugged In)
  • Plug & Play And Easy To Use
  • TIG Perfect Is Robust And Created From High Quality Materials And Components - Anodized Aluminum Case, Carbon Fiber Panels, Protective Rubber End Caps, High Resolution Screen and Push-Button Rotary Knob For Navigation & Configuration
  • Made And Assembled In the USA (Excluding The Power Adapter)
  • Shipped Complete With Instructions, Cable and Power Adapter

 

Why You Want To Weld With Pulse Functionality:

  • The same weld penetration can be obtained with less power and less heat. The more heat, the more your material will warp from the welding process. This is especially important for welding sheet metal.
  • Welders have a working duty cycle rating based on the relationship between amperage used versus time needed to wait for welder to be useable again. The less power you use, the less time the machine needs to cool down, and the more productive a user can be.
  • Pulse features allow the user to create a uniform and reliable weld more easily.
  • A pulsed weld is visually appealing, and gives the appearance of a perfect weld that was created by a machine.
  • The user can go back over ugly welds that were previously made to make them look nicer.

 

Why RJ45 Cables?:

  • Quite a few welders use RJ45 cables because of their high current carrying capabilities for signals, and for their high signal quality. This makes it a perfect cable for connecting a pedal to a welder.

 

Universal Applications:

  • With some simple wiring, you can retrofit the TIG Perfect into other welders as well - such as the Miller Syncrowave for example. This usually just involves splicing two wires and thats it.
  • "Universal" welder selection includes an additional RJ45 cable to aid in installation.
  • The TIG Perfect can drive a 0-10 volt signal, up to 1 amp of current (most welders typically only need less than 0.1 amp for the signal). You can test the signal range and current draw on your welder using a volt meter.

 

Shipping:

It will cost $15 shipping & handling to anywhere in the lower 48 states in the USA. (Note: We also ship internationally.)

 

Additional Images:

shopify traffic stats

 

Shopping Cart

{itemname}
{price}  Qty {quantity} {remove}
Total {dsShopCartSummary::total}
No items
 
©2014 Jattus. All rights reserved.